Details

The Motion Control Lite & Pro are programmable motion sensor devices designed to automate your electronics effortlessly. Whether you’re turning on a display when someone enters a room or controlling AV equipment remotely, these devices give you seamless, customizable control.

Passive Infrared (PIR) Motion Sensor

  • Wide-range, commercial-grade PIR sensor – detects motion up to 5 meters (16 feet) at a 122° angle.
  • No calibration needed – just mount with included double-sided tape and you’re ready to go.

IR & RS-232 Control

  • Sends infrared (IR) or RS-232 commands when motion is detected (ON) or stops (OFF).
  • Customize delays, loop mode, and command sequences.
  • Pro Model: Includes local API for advanced control & custom commands.

Power Options

  • Lite & Pro Models: USB-C (5V power input).
  • Pro Model Only: Supports Power over Ethernet (PoE) for easier installation.

Three Ways to Program

1. Physical Button Control

  • Toggle ON/OFF and program IR learning directly from the device.
  • LED indicators provide real-time feedback.

2. USB Programming

3. Network Control (Pro Model Only)

Advanced Features

USB Logging

  • Record inbound IR & RS-232 signals for debugging or system monitoring.

Loop Mode

  • Ensures commands are continuously sent until the motion state changes.

IR Learning Mode

  • Learn IR commands from remotes or other devices to replicate when motion is detected.

Temperature Monitoring

  • Compatible with temperature probes for environmental monitoring (Pro model).

API & Automation (Pro Model Only)

  • Local API allows custom scripts & automation integration.
  • All web UI functionality is available via API.

Deployment Example Diagram

Motion Control Pro is mounted in front of a display.

When a person enters the room, the PIR sensor detects movement.

The device sends an IR or RS-232 command to turn on the display.

A computer on the same network remotely configures settings via API.

The system logs motion events via USB for diagnostics.

Specifications

Overview

Feature Motion Control Lite Motion Control Pro
Motion Sensor Passive Infrared (PIR)
IR Protocols Audiovox, Kaseikyo, NEC, RC5, RC6, Samsung32, Sharp, SIRC
RS-232 Support 110 – 115200 baud, customizable stop/data bits
Loop Mode & IR Learning Yes
USB Logging Yes
Temperature Probe Yes, on-board vented sensor
Power Input USB-C (5V) USB-C (5V) and PoE
Programming Methods Physical buttons, USB Physical buttons, USB, Local network
API Control No Yes

Details

Motion Control Lite and Pro

  • Motion sensor: PIR with 5m range, 122° angle
  • Motion sensor connection: Hardwired with strain relief (can be spliced to x meters)
  • IR connection: Female 3.5mm jack with tip and ring, tip – anode(+), ring – cathode(-) (emitter included with 1-meter cable and adhesive)
  • RS-232 baud: 110, 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200
  • RS-232 word length: 7,8, or 9 bit
  • RS-232 stop bits: 0.5, 1, 1.5, or 2 bit
  • USB storage details: USB-A connector, FAT32 format, drive size not to exceed 4gb
  • Temperature probe range: -55 to 150°C, 0.5 °C accuracy at 25 °C
  • USB-C input details: Female USB-C connector, requires 5 volts, 1 watt typical 2 watts max

Motion Control Pro Only

  • Network standard: 10BaseT/100BaseTX Ethernet, Auto Negotiation
  • PoE power requirements: IEEE 802.3af (PoE), 1 watt typical 2 watts max
  • Network browser: Requires Chrome browser (version 123 and up)
  • Network configuration: DHCP/Static, IP Address, Subnet Mask, Gateway, DNS1, DNS2

Dimensions and Weight

Motion Control Lite 0 x 0 x 0 cm | 0 x 0 x 0 in 123 grams | 123 oz
Motion Control Pro 0 x 0 x 0 cm | 0 x 0 x 0 in 123 grams | 123 oz